產品展示
  產品介紹
  產品應用范圍
  產品出廠規范
  致冷器件制冷特點
  器件特征曲線
  產品使用注意事項
  產品信息
   除查詢“所有產品”外,必須要輸入關鍵字,才能查詢
   根據產品序號來查詢時,關鍵字里只能輸入數字。
 
  鴻昌首頁 > 產品出廠規范

產品出廠規范



商品名稱:半導體熱電致冷芯片
型 號:TECl一一系列按致冷組件參數表所列
      TESl一一系列包括微型及多級器件
包裝要求:外包裝箱為標準瓦楞出口紙箱,內裝泡沫硬盒(不同型號數量不一)。
外箱尺寸為515*280*300mm
技術參數及檢驗要求:
1.每裝運一批次必須隨附檢驗報告。
2.本公司的檢驗合格報告,證明所檢貨物與為供貨方提供的樣品的參數一致。
本公司的詳細檢驗項目如下:
(1)外觀檢驗,包括:a.輕缺陷:表面及邊緣的缺損及不規則:
b.輕缺陷:表面孔狀缺陷;
c.輕缺陷:瓷板面及導線有污漬:
d.重缺陷:外型的不完整,如斷裂或有細微裂紋。
(2)參數及尺寸檢驗:a.陶瓷尺寸規格:按客戶要求.型號與致冷器件參數表一致:
b.阻抗規格:同上:
c.負載電流規格:在額定電壓情況下,與參數表一致:
d.每一致冷片必須帶有兩根引線,一根為紅色.一根為黑色,長度按客戶要求。
引線位置為:致冷面朝上,引線朝下本公司產品平均質量水平AQL值為1.5。

Product standards
Item: I thermoelectric module
Model: TEC1 series: refer to thermoelectric Module specification Table
TES1 series includes mini type and multistage units
Package: Outer package: corrugated export case
Inter package: hard foam case (Various quantity to each type)
Outer size: 515*280* 330mm
Technical reference and check requirement 10ne quality check report attached to
each batch 2 the quality check pass report testifies that the product is of the
equal reference to the samples.
Content of qual ity check:
(1)Appearance:
a. Light defect: and irregularity of surface and edges;
b. Light defect: hole like defect on surface;
c. Light defect: sewage on ceramic plate or leads;
d. Heavy defects: lace of black heat shrinkable tube on the connecting terminal
of the TE module.
(2)Check of reference and size:
a. Standards of ceramic part: in accordance with client requirement.
b. Standards of resistance: in accordance with client requirement.
c. Standards of loading current: in accordance with specification table in the
range of rated voltage.
d. Position of leads: when cold surface is upward, the leads are downward.
Average quality level (AQL)of our products is 1.5.

 
 
Copyright © 2006-2020 河南鴻昌電子有限公司, All Rights Reserved.豫ICP備19039122號
鴻昌地址:長葛市產業集聚區魏武路東秦公路北側  電話:0374-6221169   6231058  傳真:0374-6228866   6221169
  手機:15393788002  13298216633
秋秋影视_秋秋影视午夜福利高清_秋霞在线播放看高清_秋秋影视你懂得